1999 - 2004 FORD F250 / F350 SUPER DUTY
My 1999 - 2004 FSD is pulling to one side, what can be done to fix this?
There is the possibility for vehicles equipped with the ICON dual steering stabilizer, that one of the shocks is damaged or in need of repair. The best way to verify if the stabilizer is in need of service is to remove both shocks from the vehicle an
Do ICON 1999 - 2004 Ford Super Duty kits require carrier bearing drop bracket kit?
No, not all systems require a carrier bearing drop bracket. There are some applications were driveline vibration presents itself when lifting the rear of the vehicle. ICON offers a carrier bearing drop bracket part number 33700. These issues only ari
I have a 1999 - 2004 Ford F250/F350 with an ICON track bar and a worn joint, does ICON offer a service kit?
The ICON 99-04 Ford Super Duty track bar service it is available to repair a worn joint. 611018 - 00-04 FSD TRACK BAR BUSHING AND SLEEVE KIT. The service kit includes (x4) bushings, (x2) support rings, and (x2) sleeves enough to service both the axel
Is an aftermarket adjustable track bar required on 1999 - 2004 Ford Super Duty systems?
An aftermarket adjustable track bars is not required but is needed to center the axle underneath the vehicle correctly. ICON always recommend using an aftermarket track bar on solid axle applications to adjust for shift in the axle position due to li
Can the ICON Ford Super Duty spring kit be used with another brand shock absorber?
The ICON leaf springs and hanger kits were designed ICON shock absorbers and have not been tested with other aftermarket shock manufacturers. Other brand shock absorbers may not pose and installation issue but for optimum ride quality ICON recommends
Will ICON 99-04 Super Duty kits work with gas engines?
Yes, but the springs are rated for diesel engines. Gas engines will yield different lift heights compared to diesel engine. The V10 engines are very close in weight to the diesel engines and will sit close to same height. V8 engines will sit approxim
Can the ICON Ford Super Duty dual shock mount kit be used with a single shock?
No, the door shock mount kit is designed to run dual shocks. If only one shock is used it can cause damage to the bracket or shock. Both shocks are required for installation to avoid damage.