2000 - 2006 TOYOTA TUNDRA 2WD & 4WD
Are aftermarket upper control arms required on the 2000 - 2006 Tundra systems?
No, aftermarket up control arms are not required on 00-06 Toyota Tundra. Tundra UCA’s provide enough alignment adjustment to set the vehicle within the factory alignment spec range. Lifting the vehicle over 2.5” on some vehicles the stock upper contr
My 2000-2006 Toyota Tundra is leaning to the driver side, what can be done to remedy this?
Toyotas are designed and built with a bias to the driver side due to weight. Toyota Tundras have both the battery and gas tank on the driver side. New vehicles have this lean right off the showroom floor, but is not typically noticed until a suspensi
Does ICON offer coilovers for 6” lifted Tundra’s?
Yes, there are several lifted applications available for the 00-06 Toyota Tundra. The extended and compress lengths of the coilover on your vehicle is required to identify the correct ICON coilover part number for your specific kit. If a coilover is
What’s the difference between standard and extended travel 2000 - 2006 Tundra coilovers?
The ICON extended travel coilovers are intended to be paired with aftermarket upper control arms. The added angularity provided by an aftermarket UCA allows ICON engineers to give the vehicle more down travel then the stock coilover. The ICON extende
Do you have to remove the over load leaf when installing an ICON 51100 Add-A-Leaf kit?
Yes, the Add-A-Leaf kit was designed to take place of the factory over load leaf on 00-06 Tundra’s. However, over load leaf can be left in as an option if additional lift is desired. The size of the shortest leaf spring on the ICON 51100 is short eno
What are the spring rate options for the ICON 2000 - 2006 Tundra coilover?
The Tundra coilovers are built with an ICON standard production 650lb/in coil spring. 158504 - COIL SPRING 1300.0300.650 BLACK. ICON offers a heavier rate coil spring option that is a 700lb/in spring rate. 158508 - COIL SPRING 1400.0300.0700 BLACK. C
What is the nitrogen charge pressure on 2000 - 2006 Toyota Tundra coilovers?
Toyota Tundra Internal Floating Piston coilovers are preset from the factory at 250 psi. Contact ICON tech-support for more details (951) 689-ICON.
Does ICON offer a replacement bearing kits for front 2002 - 2006 Toyota 4Runner coilovers?
Yes, ICON manufactures a bearing service kit for Toyota 4Runner coilovers. Part number:. 611067 - TACOMA/FJ/4RNR LOWER CO BRG/SPCR KIT. This kit includes two bearings for clips and all four-space is required for the front lower coilover mount. For mo
How much lift over stock do the ICON 2000 - 2006 Toyota Tundra coilovers provide out of the box?
ICON coilover kits are preset out of the box at the optimum balance between compression and droop travel to give the best ride quality. The ICON coilovers yield approximately 2” of lift overstock from factory setting. Motor size, door configuration,
Does ICON offer a Delta Joint upgrade for 2000 - 2006 Tundra uniball UCA’?
An ICON Delta Joint retrofit kits is available for NON-ICON UCA’s that utilize a 1” uniball. The ICON Delta Joint kit for 00-06 Tundra’s is available for NON-ICON UCA’s and will require the following Delta Joint retrofit kit, press tool adapter, and
Are differential drop spacers required on 02-06 Tundra suspension systems?
No, front differential drop spacers are not required for ICON suspension systems. Depending on your vehicles lift height, the need for a diff drop spacer can be completely avoided with proper alignment adjustments. Tundra’s set at 3” or more of lift
My 02-06 Toyota Tundra coilovers came with two different size spacers for the lower mount what is the correct orientation?
For 02-06 Toyota Tundra the large spacer should be oriented rearward for adequate CV clearance. The lower shock mount will be offset forward. The spacer will have to be in the lower mount before installing it between the shock tabs on the lower contr
Do 2002 - 2006 Tundra shocks fit on 2007 - 2019 Tundra?
No, the platforms from first GEN 02-06 Tundra to 07-19 second and third GEN Tundra are entirely different. ICON coilovers for first GEN Tundra‘s will not fit on newer your model trucks and vice versa. The rear shocks will not work either, the 07-19 T
Do you offer a piggyback CDCV rear 2.5 shock for 2002 to 2006 tundra?
Yes, ICON offers a 2.5 CDCV rear shock option for this platform. Part number 57715CP is the piggy back adjustable version of the rear 2002-2006 Toyota Tundra shock. This shock is not available in any stage kit but is an a la carte option if requested
Does Icon offer upper control arms for 2002 to 2006 Tundra’s?
No, Icon does not currently offer aftermarket control arms for this platform. ICON offers extended travel coilovers for various aftermarket upper control arms. Please call ICON tech-support for more details (951) 689-ICON.
Does Icon offer a remote reservoir coil overs for 2002 to 2006 Toyota Tundra‘s?
No, there is currently not a production coil over with remote reservoir or CDCV option for 02-06 Tundra’s. Please call Icon tech-support for more details.