2005 - 2019 TACOMA PRERUNNER & 4WD
Are aftermarket upper control arms required on the 2005 - 2019 Tacoma systems?
No, aftermarket up control arms are not required on 05+ Toyota Tacoma. Tacoma UCA’s provide enough alignment adjustment to set the vehicle within the factory alignment spec range. Lifting the vehicle over 2.5” on some vehicles the stock upper control
How do ICON extended travel coil overs provide more travel overstock on Toyota Tacoma’s?
Most independent front suspension systems use the coil over as the limiting component when setting down travel. The upper control arm us typically the deciding factor due to it's lack of angularity. ICON engineers have found that more travel is avail
My 2005 - 2019 Toyota Tacoma is leaning to the driver side, what can be done to remedy this?
Toyota’s have been designed and built with a bias to the driver side due to weight. Toyota Tacoma’s have both the battery and gas tank on the driver side. New vehicles have this lean right off the show room floor but is not noticed until a suspension
Can the ICON shock boot kit be fitted on Toyota Tacoma RXT shocks?
No, due to the unique design of the ICON RXT rear Tacoma shock a traditional shock boot is not available for this application. The shock boot design requires it to mount to the cylinder body in the lower right end but the RXT shock does not have a mo
Does ICON offer coilovers for 6” lifted Tacoma’s?
Yes, there are several lifted applications available for the 05-19 Toyota Tacoma. The extended and compress lengths of the coilover on your vehicle is required to identify the correct ICON coilover part number for your specific kit. If a coilover is
Can first GEN 96-04 Tacoma shocks be fitted on second and third GEN 05+ Tacoma’s?
No, the 96-04 Tacoma‘s are very different than the 2005 and newer. Second and third GEN Tacoma’s will require an entirely new coil over and rear shock part number. A conversion is possible however the price is not cost-effective. The parts list requi
Are ICON S2 shock system compatible with the Tacoma TRD Big Brake kit?
No, the Tacoma TRD Big Brake kit will come in contact with the secondary shock at full lock. Modifications can be made to the steering to limit his clearance or limit his contact but the system will require custom installation to avoid interference.
Can the ICON standard/non-RXT shocks be converted to RXT?
No, the vast majority of the components in the RXT version shocks is different than the standard shocks. The RXT Series are comprised of a different cylinder, shaft, and rodend combination compared to their non-RXT counter parts. It is not a cost-eff
What’s the difference between standard and extended travel 2005 - 2019 Tacoma coilovers?
The ICON extended travel coilovers are intended to be paired with aftermarket upper control arms. The added angularity provided by an aftermarket UCA allows ICON engineers to give the vehicle more down travel then the stock coilover. The ICON extende
What is the spring rate on the Long Travel 2005 - 2019 Toyota Tacoma coilover?
The Tacoma long travel coilovers are available with 600lb/in coil springs. ICON Coil Spring Part number: 198500. ICON Coilover Part numbers: 59730 & 59730C. Unlike the non-long travel coilover offerings, there is not a heavier rate coil spring availa
What are the spring rate options for the ICON 2005 - 2019 Tacoma coilover?
The Tacoma coilovers are built with an ICON standard production 650lb/in coil spring. 158504 - COIL SPRING 1300.0300.650 BLACK. ICON offers a heavier rate coil spring option that is a 700lb/in spring rate. 158508 - COIL SPRING 1400.0300.0700 BLACK. C
What is the nitrogen charge pressure on 2005 - 2019 Toyota Tacoma coilovers?
Toyota Tacoma coilovers are preset from the factory at 250 psi. (ICON Part Number's: 58630 and 58635). Toyota Tacoma remote reservoir coilovers are preset at 250 psi. (ICON Part Number's: 58730 and 58735). Remote reservoir CDCV adjustable coilovers a
Does ICON offer a replacement bearing kits for front 2005 - 2019 Toyota Tacoma coilovers?
Yes, ICON manufactures a bearing service kit for Toyota Tacoma coilovers. Part number:. 611067 - TACOMA/FJ/4RNR LOWER CO BRG/SPCR KIT. This kit includes two bearings for clips and all four-space is required for the front lower coilover mount. For mor
How much lift over stock do the ICON 2005 - 2019 Toyota Tacoma coilovers provide out of the box?
ICON coilover kits are preset out of the box at the optimum balance between compression and droop travel to give the best ride quality. The ICON coilovers yield approximately 2” of lift overstock from factory setting. Motor size, door configuration,
Can ICON 2005 - 2019 Tacoma upper control arms work with long travel suspension systems?
No, ICON upper control arms are designed to work with a stock width vehicle. Aftermarket long travel systems will require upper and lower control arms that are longer then stock to increase the track width and wheel travel of the vehicle.
Can ICON 2005 - 2019 Tacoma uniball UCA’s be upgraded to Delta Joints?
All ICON upper control arms, billet aluminum and tubular steel, can be retrofitted to Delta Joints. Delta Joint upgrade kits are sold based on vehicle model. The ICON UCA kit for 05-19 Tacoma is available in billet aluminum and tubular steel. Dependi
Are differential drop spacers required on 05-19 Tacoma suspension systems?
No, front differential drop spacers are not required for ICON suspension systems.
Can the 05+ Tacoma hydraulic bump stop kit be installed on a stock truck?
Yes, the 05+ Tacoma hydraulic bump stock kit can be installed on a factory OEM vehicle. There would be no interference between the ICON bump stop system and the factory components on the vehicle. Compatibility with other manufacturers lease springs a
My 2005-UP Toyota Tacoma coilovers came with two different size spacers for the lower mount - what is the correct orientation?
For 2005-UP Toyota Tacoma the large spacer should be oriented forward to clear the sway bar mount to the coilover. The lower mount will be offset rearward. The spacers will have to be inserted in the lower mount before installing it between the shock
The factory upper control arm bolt and washer cannot be removed, what can be done?
The 05+ Tacoma upper control arm bolt washer and flange on the bolt head may come in contact with the fender liner. In some cases, grinding or cutting the fender liner slightly will be required to remove the factory upper control arm bolt. It is also
Why is the max lift height max for 2005-20015 Tacoma coilovers different than 2016+ Tacoma coilovers?
The 05-15 Tacoma’s started off at a lower ride height from factory. After 2016 Toyota Tacoma’s were set higher from factory. Both generations of trucks have the same max adjustment available. Because newer models start higher from the factory they ha
Will Toyota Tacoma upper control arms work on an FJ Cruiser or 4runner?
No, the Toyota Tacoma and Toyota FJ & 4Runners have different taper pins in the upper control arms. Toyota truck share the same ball joints and Toyota SUV’s share the same ball joint. A truck UCA can be converted to fit an SUV and vice-versa if the b
Can I convert my 05+ Tacoma IFP coil overs to remote reservoir or CDCV?
Yes, non-reservoir coilovers can be upgraded to either Remote Reservoir or CDCV. 51035 - 05-UP TACOMA/07-UP FJ RESI UPGRADE KIT W SEALS PAIR. 51035C - 05-UP TACOMA/07-UP FJ RESI CDCV UPGRADE KIT W SEALS PAIR. Reservoir upgraded kit include all the ne
Will ICON kits work with TRD Pro Tacoma’s?
Yes. ICON suspensions systems are compatible with TRD Pro trim level Toyota Tacoma's. TRD Pro models are set with a slightly higher ride height compared to non-Pro models. The max lift range on ICON systems will be less on Pro model due to the added
Will the ICON 0-1.5” lift rear shock work with higher lift heights on this on 2005 - 2019 Toyota Tacoma?
Yes, the ICON rear shock is compatible with higher lift height. The 0-1.5” recommendation is based on optimum ride quality for the vehicle. Using the ICON shock on higher lift applications may function correctly without damage but right quality may s
Will Toyota Tacoma rear shocks work on an FJ Cruiser or 4runner?
No, the Toyota Tacoma and Toyota FJ/4Runner rear shocks are similar but ICON production rear shocks are not directly compatible between platforms. Please call ICON tech-support for more details (951) 689-ICON.
Do you have to remove the over load leaf when installing an ICON 51100 Add-A-Leaf kit?
Yes, the Add-A-Leaf kit was designed to take place of the factory over load leaf on 05-19 Tacoma’s. However, over load leaf can be left in as an option if additional lift is desired. The size of the shortest leaf spring on the ICON 51100 is short eno
Can ICON 05+ Tacoma extended travel coil overs work with long travel suspension systems?
No, extended travel coilovers do not carry over to long travel systems. A new coilover kit is required when switching to long travel. There are 2 options available:. 59730 - 05-UP TACOMA/07-UP FJ 2.5 VS RR COILOVER KIT W LONG TRAVEL. 59730C - 05-UP T
My 05+ Tacoma coil overs are currently set to the maximum thread showing, what can I do to get more lift?
If you are currently at the max thread recommendation there is an option available to provide more lift. The max compressed length for front suspension is determined by the factory bump stops. The max thread showing is set with this dimension in mind