2009 - 2013 FORD F150 2WD / 4WD
Are aftermarket upper control arms required on the 2009 - 2013 Ford F150 systems?
No, aftermarket up control arms are not required on 09-13 Ford F150. The F150 UCA’s provide enough alignment adjustment to set the vehicle within the factory alignment spec range. Lifting the vehicle over 2.25” on some vehicles the stock upper contro
Does ICON offer coilovers for 6” lifted F150’s?
Yes, there are several lifted applications available for the 09-13 Ford F150. The extended and compress lengths of the coilover on your vehicle is required to identify the correct ICON coilover part number for your specific kit. If a coilover is not
What is the nitrogen charge pressure on 2009 - 2013 Ford F150 coilovers?
Ford F150 coilovers are preset from the factory at 250 psi. (ICON Part Number's: 91600 & 91700). Ford F150 remote reservoir coilovers are preset at 250 psi. (ICON Part Number's: 91800 & 91805). Remote reservoir CDCV adjustable coilovers are charged t
How much lift over stock do the ICON 2009-2013 Ford F150 coilovers provide out of the box?
The ICON coilovers yield approximately 2” of lift over stock from factory setting. Trim level, engine size, cab configuration, and drive type will cause the height achieved from the factory setting to vary slightly. Heavier weight vehicles will get l
Are 2009 - 2013 F150 2WD and 4WD kits compatible with one another?
No, the F150 2WD and 4WD systems are not 100% compatible with one another. Upper control arms and rear shock can be converted from F150 2WD and 4WD. However, 2WD and 4WD trucks have different coilover assembly lengths. The Ford F150 4WD models have a
Can ICON 2009 - 2013 Ford F150 uniball UCA’s be upgraded to Delta Joints?
All ICON upper control arms, billet aluminum and tubular steel, can be retrofitted to Delta Joints. Delta Joint upgrade kits are sold based on vehicle model. The ICON UCA kit for 09-13 Ford F150 is available in billet aluminum and tubular steel. Depe