2010 - 2014 FORD RAPTOR
What is the difference between 98561DJ and 98562DJ for the Ford Raptor?
The update was to accommodate the ride level sensor the was added to the truck in 2018. The newer 98562DJ’s have a mounting position in the UCA for the ride level sensor and 98561’s does not. The 98561DJ’s cannot directly bolt on 2018 - 2019 without
How much lift over stock do the ICON 2010 - 2014 Ford Raptor coilovers provide out of the box?
ICON coilover kits are preset out of the box at the optimum balance between compression and droop travel to give the best ride quality. The ICON coilovers yield approximately 1.5” of lift overstock from factory setting. Motor size, door configuration
Can ICON 2010 - 2014 Ford Raptor uniball UCA’s be upgraded to Delta Joints?
All ICON upper control arms, billet aluminum and tubular steel, can be retrofitted to Delta Joints. Delta Joint upgrade kits are sold based on vehicle model. The ICON UCA kit for 10-14 Ford Raptor is available in billet aluminum only and will require
Can the ICON standard/non-RXT shocks be converted to RXT?
No, the vast majority of the components in the RXT version shocks is different than the standard shocks. The RXT Series are comprised of a different cylinder, shaft, and rodend combination compared to their non-RXT counter parts. It is not a cost-eff
Can Ford Raptor RXT leaf spring kits be used with the factory shock?
Yes, the ICON raptor RXT springs are designed to work in conjunction with stock or aftermarket shocks. In order to take advantage of the entire systems benefits the ICON RXT bump stop kit, RXT shock kit and RXT leaf springs kit are required. The fact
Are 2010 - 2014 Ford Raptor upper control arms available in tubular steel?
No, the ICON Ford Raptor upper control arm is only available in the adjustable billet aluminum version. This ICON billet aluminum upper control arm kit is designed to improve the overall performance with corrected front end geometry, adjustable cambe
Do the 2010 - 2014 Ford Raptor RXT leaf springs require the removal of the factory lift block?
Yes, the ICON Ford Raptor RXT rear leaf spring system is designed to remove the OEM lift block. The leaf springs bolt directly on the axle housing.