GENERAL WHEEL TECH FAQ
Categories
Articles
Are hub rings required/provided with ICON Alloys?
No, ICON Alloys designed for a specific vehicle application will already have the correct hub bore. The tight tolerance that ICON Alloys are manufactured to will not allow for a hub ring to be fitted between the hub snout and the inner diameter of th
Are lug nuts included with ICON Alloys?
No, lug nuts are not included when purchasing ICON Alloys. Aftermarket lug nuts will need to be sourced prior to installation. ICON Alloys require a 60° taper acorn style lug nut for installation. This is a very common lug type and is available at mo
Will OEM lug nuts work on ICON Alloys?
No, OEM lug nuts are designed for a different mounting style than whats found on ICON Alloys. The lug nuts required for all ICON Alloys are 60° taper acorn style lug nuts. There are several options available, (hex, spline, tamper proof etc.) as long
What lug nuts are required for ICON Alloys?
The lug nuts required for all ICON Alloys are 60° taper acorn style lug nuts. There are several options available that will work (hex, spline, tamper proof etc.) as long as the seat remains a 60° taper acorn. This is a very common lug type and is ava
Do ICON alloys work with stock TPMS sensors?
Yes, ICON Alloy’s are compatible with stock TPMS (Tire Pressure Management System) sensors. Some sensors will require a different installation procedure compared to stock. In some cases, the tire will need to be installed on the wheel and the TPMS se