2010 - 2019 LEXUS GX460
How do ICON extended travel coilovers provide more travel over stock on a Lexus GX460?
Most independent front suspension systems use the coilover as the component that dictates down travel. The upper control arm is typically the limiting factor due to it's lack of angularity. ICON engineers have found that more travel is available if t
Can ICON 2010-2019 Lexus GX460 rear shocks be used with stock coil springs?
No, the ICON rear GX460 shocks are designed to gain wheel travel over stock. The added wheel travel provided by the ICON units will allow for the factory coil spring to come loose at full extension. ICON recommends using an ICON coil spring kit (Part
How do you gain access the grease zerk fitting on the 2010-2019 GX460 rear lower links?
The ICON 54000 billet lower link system has a greaseable zerk fitting at the axle housing mounting point. The fitting is located at the end of the link and the grease adapter will have to go from the top down. In order to gain access to that grease p
The bolts on my 2010 - 2019 Lexus GX460 skid plate are not long enough?
In some cases the Toyota 4Funner requires two or even three 9/16” washers for the skid plate crossmember. In those cases, the factory bolts are not be long enough to allow proper engagement for the skid plate to the frame. For situations like this, I
Does ICON offer coilovers for 6” lifted GX460’s?
Yes, there are several lifted applications available for the 10-19 Lexus GX460. The extended and compress lengths of the coilover on your vehicle is required to identify the correct ICON coilover part number for your specific kit. If a coilover is no
The factory upper control arm bolt and washer cannot be removed, what can be done?
The 10-19 GX460 upper control arm bolt washer and flange on the bolt head may come in contact with the fender liner. In some cases, grinding or cutting the fender liner slightly will be required to remove the factory upper control arm bolt. It is als
What is the spring rate on the Long Travel 2010 - 2019 Lexus GX460 coilover?
The GX460 long travel coilovers are available with 600lb/in coil springs. ICON Coil Spring Part number: 198500. ICON Coilover Part numbers: 59730 & 59730C. Unlike the non-long travel coilover offerings, there is not a heavier rate coil spring availab
What are the spring rate options for the ICON 2010 - 2019 GX460 coilover?
The GX460 coilovers are built with an ICON standard production 650lb/in coil spring. 158504 - COIL SPRING 1300.0300.650 BLACK. ICON offers a heavier rate coil spring option that is a 700lb/in spring rate. 158508 - COIL SPRING 1400.0300.0700 BLACK. Co
Does ICON offer a replacement bearing kits for front 2010 - 2019 Lexus GX460 coilovers?
Yes, ICON manufactures a bearing service kit for Lexus GX460 coilovers. Part number:. 611067 - TACOMA/FJ/4RNR LOWER CO BRG/SPCR KIT. This kit includes two bearings for clips and all four-space is required for the front lower coilover mount. For more
How much lift over stock do the ICON 2010 - 2019 Lexus GX460 coilovers provide out of the box?
The ICON coilovers yield approximately 2” of lift overstock from factory setting. Motor size, door configuration, and drive type will vary the height achieved from the factory setting. Heavier weight vehicles will get less lift whereas lighter ones w