2020 JEEP GLADIATOR (JT)
Can 2.5” lift JT shocks be used with stock coil springs?
No, the 2.5” lift shocks are designed to gain more down travel then the stock coil spring can handle. At full extension the coil spring will come unseated form the spring perch. Custom shocks can be built to allow for stock coil springs to be used bu
After installing an ICON suspension system, my Jeep JT is now leaning to the passenger side. What can be done to remedy this?
The ICON coil spring kits come with a spacer that will mitigate the lean that even stock Jeeps have from the factory. Not all Jeeps have this lean, but the cause is due to the fact that the spare tire and the gas tank weight is predominantly held on
How do you get the driver side front axle to droop far enough to install the longer ICON JT coil springs?
On the front of the Jeep JT’s at full extension, with the shock absorber disconnected, the drive line will not allow the axel housing to droop far enough to install the ICON coil spring. At that angle the stock OEM driveline is coming in contact with
Why is the maximum tire size different for JT Rubicon‘s vs. other model JT keys?
Jeep JT Rubicon’s and non-Rubicon’s have different fender profiles. Jeep JT Rubicon’s are fitted with higher clearance fenders from the factory. The different profile fenders allow for a larger size tire to be fitted on Rubicon model with little modi
Can 37” tires be fitted on Icon JT suspension systems?
Yes the icon 3 inch and 4.5 inch lift system has an accommodation for 37 inch tires. An additional taller bump stop spacer kit is required to fit 37 inch tires. 22029 - 18-UP JL/20-UP JT EXTENDED BUMP STOP SPACER KIT. The ICON extended bump stop spac
Is the ICON Jeep JT suspension system considered a long arm kit?
No, the ICON 2.5” suspension system is not considered a long arm kit. Long arm systems require relocating the link pivot points and increasing the link length significantly over stock. The ICON JT systems increase the length of the links enough to ac
Are aftermarket adjustable tracks bar required on Jeep JT systems?
An aftermarket adjustable track bar is not required but is needed to center the axle underneath the vehicle correctly. ICON always recommend using an aftermarket track bar on solid axle applications to adjust for shift in the axle position due to lif